Skip to main content

GZR | Rough-e Fatbike electric bicycle, 19″ frame

GZR | Rough-e Fatbike electric bicycle, 19″ frame

See all Happy Work gifts


Forget about traditional bike routes, with this you can ride anywhere! Snow, ice, marsh, forest trails, jogging tracks, sandy beach, even commuting in any weather is possible. GZR Rough-e goes anywhere. The reliable Shimano Deore transmission ensures safe and steady movement. With its ten-speed gear system, it offers a wide range of ratios for different situations, and spare part costs are reasonable. Shimano hydraulic disc brakes work reliably in all conditions. The electric assistance is provided by a Bafang rear hub motor and a reliable PAS pedal sensor. Thanks to the pedal sensor, you can also ride lightly by just turning the pedals, allowing the electric motor to do most of the work. Please note, however, that in this mode, the motor’s power consumption increases significantly and reduces the battery life.

Frame size: 19″

Recommended rider height: 175-190 cm Frame: Aluminum 6061 hydroformed, Fatbike

Fork: Rigid, aluminum

Rear derailleur: Shimano Deore RD-M5120 SGS 10s Shifters: Shimano Deore SL-M6000 10s Crankset: 170 mm Bottom bracket: 100 mm BSA, axle 159.5 mm Front sprocket: Narrow-wide teeth, 38T, BCD 104 mm Cassettes: Shimano CS-M4100 11-46 10s Chain: KMC E10s NPBK Brake levers: Shimano BL-MT200 Brakes (front): Shimano BR-MT200 Brakes (rear): Shimano BR-MT200 Brake discs: Shimano SM-RT26 180 mm 6-bolt Tires: Veetire Snow Avalanche 26×4.0″, 120 tpi Rims: 26″ HJC P80, 36 holes Front hub: KT-M9DF 9mm QR 150 mm, 36 holes Rear hub: Bafang motor Spokes: steel 14G front, 12G rear black Handlebar: 760 mm low riser 31.8 mm

Headset: Neco tapered 1-1/8″x1.5″, 44x56x39.8 mm Grips: Velo lock-on grips Stem: 70 mm Seatpost: 30.9 x 400 mm Saddle: GZR Pedals: included Maximum allowed load: 120 kg Kickstand attachment: hole spacing 40 mm

Electrical system:

Motor: 250 W brushless rear motor Bafang RM-G060.250 Battery: 36 V, 14.5 Ah, 522 Wh lithium battery The battery locks onto the bike and can be removed with a key for charging Range with electricity up to 40 km Includes charger, charging time 3-6 h Speed controller and LCD display Five-level assistance selector Pedal detection: INS-V12 PAS sensor Weight: 21.5 kg

The bike is delivered in a factory package almost fully assembled. If not stated otherwise for the bike, assembly level is 95%. With minor adjustments, you can get the bike ready to ride.

When installing pedals, it is advisable to apply grease or oil to the threads. Be careful to ensure that the left and right pedals are installed correctly. Start tightening with your fingers and use a tool only at the final stage. Tighten the pedals carefully.

Check the adjustments of brakes and gears before the first ride.

Small parts such as reflectors are generally loose, remember to install them for safe movement. For more assembly tips, read our general instructions.

We recommend that the bike be serviced after 100-300 km of riding by a professional bicycle service. If you have difficulty finalizing the bike for riding, consult a professional bike service.

Product availability may vary. The manufacturer reserves the right to make changes to colors, materials, components, technical specifications, and models. Assembly level, components, and technical specifications may vary between different production batches.

Assembly levels:

98% “ready to ride” – Front tire, pedals, and seat post are not installed. The stem needs to be turned to the correct position and tightened. Gears and brakes are already adjusted at the factory. 95% – Front tire, pedals, seat post, and handlebar are not installed. Check the tightness of bolts and nuts. Gears and brakes are almost ready for fine-tuning. 90% – Front tire, pedals, seat post, and handlebar are not installed. Mudguards and any basket are not installed. Check the tightness of bolts and nuts. Gears and brakes are likely not properly adjusted.